Find a repair centre

Support & Downloads: Epson Stylus Pro 9890 SpectroProofer

Wi-Fi Direct: How to setup a printer with no screen

This article explains how connect a printer directly to devices without an access point. The printer acts as an access point.

Supported Products

  • EcoTank ET-2710
  • EcoTank L3150
  • Expression Home XP-255
  • Expression Home XP-257

Explanation

  1. With the printer turned on, hold in the Wi-fi button and press the once, until the and lights flash alternately.
  2. Load paper into the printer
  3. Hold in the button until the printer starts printing. (This prints off an advanced wi-fi status sheet)
  4. Once the sheet has been printed off under the section marked as Wi-Fi Direct you will see the SSID (the device name) and the Password.

    An example is shown here below.

  5. On the device e.g., Phone or tablet open the wi-fi connection option and look for the Wi-fi Direct device which matches the details printed off and select it, then enter the password.
  6. Once connected a light will appear near the Wi-fi Direct icon

    EcoTank ET-2710
    EcoTank L3150
    Expression Home XP-255
    Expression Home XP-257

Did you find this article helpful

Thanks for leaving feedback