This issue occasionally occurs when Windows uses a foreign language printer information file during the installation process. This happens more commonly if you complete the Windows Found New Hardware Wizard during the installation of the Epson printer driver.
If your product is not listed above, or if English is not listed as a selectable language in the printer driver, follow the steps below to resolve the issue with a full uninstall of the printer driver.
Removing the Epson software from the Uninstall a program option from the Control Panel alone will not remove the foreign language files.
Uninstalling the Printer Driver and Status Monitor
Follow the instructions below to remove the foreign language files from the Epson printer driver and Status Monitor.
This will remove all currently installed Epson printers but must be followed in order to resolve the issue.
Important: This article assumes that your printer is operational (e.g. displaying no errors) and addresses the foreign language driver issue only.
Start with the printer powered on and connected to the computer.
Open the Printers folder. Check for and cancel any queued documents for any installed Epson printer.
Click Start > Devices and Printers.
Right-click on the Epson printer icon, then left-click on See What's Printing to open the print queue.
If documents are waiting in the print queue, click Printer then Cancel All Documents.
If you have more than one icon for your Epson printer model(s), repeat this procedure for any duplicate drivers. However, be aware that Windows 7 has a new feature called port stacking. This means that if one or more printer drivers are using the same virtual printer port, Windows will stack the printers as a list when you right-click the printer icon, but only one printer icon will be displayed.
If you have had to cancel documents, restart the computer before moving on to the next step. To restart the computer, click Start > Restart.
Power off the printer and disconnect the data cable.
Uninstall the printer driver from Programs located in Control Panel.
Click on the Start menu, then Control Panel.
Click on Uninstall a program. (If Uninstall a program is not listed, look for and click on Programs and Features.)
Locate and double-click on EPSON Printer Software or EPSON XXXXX Series Printer Uninstall (this may be shown in a foreign language, e.g. "EPSON-Drucker-Software"). A size will not be stated, this is normal.
Click Continue if you receive a Windows permission request to "Uninstall or change an application".
The EPSON Printer Utility window will appear (this may be titled in the foreign language, e.g. "Deinstallation fur EPSON-Drucker-Utilities").
Click on the Epson printer icon that corresponds to the printer you wish to uninstall and click OK.
Answer "Yes" to all prompts to complete the uninstall process.
Click OK to the "Uninstall complete" notification.
Repeat this procedure until all Epson printer drivers are uninstalled.
Browse to the inf folder from the Start Search menu, Windows Explorer, or Computer:
Open Windows Explorer or Computer.
Navigate to the drive that Windows is installed on (usually C:).
Open the WINDOWS folder.
Open theinf folder.
If you cannot locate the inf folder open the Start menu and select Run. Type inf into the blank Open: box then press Enter. Alternatively, hold Windows logo key + R). Type inf into the blank Open: box then press Enter.
You will now need to search for the SEIKO EPSON 'oem' files in the C:\WINDOWS\inffolder.
Locate the files named OEMxx.inf (where xx is a number from 0, 1, 2, etc. upwards). The oem files you locate may not display the .infextension.
There are normally two oem files that share the same number. For example with oem1 there would normally be oem1 and oem1.PNF.
oem.inf file: oem.PNF file:
Start with the first oem.inf file (usually oem0.inf).
You cannot open a .PNF file.
Double-click on the file and it will open in Notepad.
Check for "SEIKO EPSON" or "EPSON" within the first few lines of text.
If it does not say "SEIKO EPSON" or "EPSON" within the first few lines, close the file and check the next oem file. To close a file, click on theclose icon found in the top-right of the program window.
If "SEIKO EPSON" is listed within the first few lines and the printer details are listed further down, close and delete the file. To delete it, right-click on the file and a menu will appear, and then left-click on Delete.
You MUST NOT delete any OEMxx files that do not contain "SEIKO EPSON".
Click Yes to the "Confirm Delete" prompt, to send the file to the Recycle Bin. Then delete its corresponding oem.pnf file.
In the example below, oem40.inf is a SEIKO EPSON file. This should be deleted along with oem40.PNF.
Continue to check each OEMxx.inf file in turn, following the procedure above.
Once all OEMxx.inf files have been checked, close the inf folder.
Once the computer has restarted, empty the Recycle Bin.
Right-click the Recycle Bin icon on the Desktop.
A menu will appear; left-click on Empty, or Empty Recycle Bin.
Click Yes to the prompt to delete the items in the Recycle Bin.
Make sure that your printer is still switched off and disconnected from the computer. The printer driver is now uninstalled. Next, reinstall the printer driver according to the method given in Epson and Windows 7, if your model was released after mid-2010 then re-install using the CD-ROM. If you need to download a driver from the Epson website, refer to How to download drivers and software from the Epson website for help.
Follow the instructions below to install the driver from the CD-ROM.
Insert your EPSON Software CD-ROM. Click Exit if the 'Epson Install' menu appears.
Right-click on the Epson CD icon and select Explore.
Double-click on the Setup folder. Then click either SETUP64 (Windows 64-bit users) or SETUP86 (Windows 32-bit users) files in that folder.
The EPSON Printer Utility Setup window will appear. Click on the correct printer model to highlight it and click OK to continue.
Power on the printer and connect it to the computer when prompted. Connect the printer directly to a USB port on the computer - do not connect it via a third-party device such as a USB extension cable or USB hub.
If the Windows "Found New Hardware" window appears, check the device that the Wizard refers to.
If it mentions the full product name, such as "Epson Stylus SX410 Series", then click Cancel. This is important as following the Found New Hardware Wizard may cause the problem to reoccur.
If you have an All-In-One and it is for "Epson Scanner", follow the Wizard through – clicking Next and OK. This will install the scanner correctly.
If the Epson installation does not continue after a couple of minutes, check that the USB cable is securely connected in both the computer and printer ports, then click the "Manual" button.
If clicking the "Manual" button was necessary, select an available USB (Virtual printer port for USB) from the list. Click OK.
Once the installation is complete, click OK. Remove the CD from the CD-ROM drive and restart the computer.
(You can change your interests at anytime by going to your profile)
Thanks again for signing up